DIY Wood Color Block Table Top from 2×4’s

DIY Wood Color Block Table Top from 2×4’s

Sharing is caring!

Get a unique, pretty & super cheap table top with this Wood Color Block Table Top DIY tutorial!

Hi guys! I’m so excited to share this little 2×4 project with you all today. I dreamed up this project a few months ago and thought it’d be a perfect excuse to replace the tops on this $20 DIY Side Table, I shared a couple years ago. And, I’m loving how the new Wood Color Block Table Top DIY from 2×4’s looks on that Side Table. What do you think?

How to build a colorful table top using 2x4 pine studs and acrylic paints. Wood Color Block Table Top DIY tutorial, using cheap pine 2x4's. #woodworkingprojects #woodprojects #woodart #diyfurniture #AbbottsAtHome
Look at those beautiful colors. They really pop off that white table frame!

Using 2×4’s and a table saw can be a great way to save money on a build. This is a great way for new woodworkers to practice building without spending too much money. And, it can look just as pretty as the expensive wood. I built these color block table tops for less than $10 each, paint included.

I’ve teamed up with some very talented bloggers this month to share our latest 2×4 build projects. You can find the link to their creative 2×4 builds at the end of this tutorial. 🙂

Build a unique, pretty & super cheap table top with this Wood Color Block Table Top DIY tutorial, using 2x4's. #Woodworking #AbbottsAtHome #DIYprojects #DIYFurniture
Don’t forget to Pin Me!

Now, here’s the build steps for this DIY Wood Color Block Table Top. Follow me on Instagram to get sneak peeks of all of my latest DIY projects.


THIS POST CONTAINS AFFILIATE LINKS. AFFILIATES HELP YOUR FAVORITE BLOGGERS DELIVER FREE CONTENT Read the full disclaimer here.


Materials Needed

DIY Note: My Wood Color Block Table Top DIY from 2×4’s is 12 3/4″ x 17 1/4″. You’ll need to adjust the measurements to fit your table.

Watch the 5-Minute Build Video

Wood Color Block Table Top DIY Steps

Build Note: You can see me cutting my blocks in the build video.

Step One

Pick straight, dry 2×4 studs with the least amount of knot holes and dings. Don’t buy pressure treated studs. You want the nicest indoor framing studs because they will be easiest to work with. I used 2x dimensional lumber because the 1 1/2″ wood gives a pretty, chunky look that I wanted. AND, it’s nice and cheap. I spent about $2.50 per stud. That’s pretty cheap, right!

Step Two

Cut the boards to length with your Miter Saw. I went with 12 3/4″ because I wanted to see the ends of the boards from the front of my tables. BUT, you could run them the other way too. Try to use a stop block (see video) to easily cut boards the exact same length.

My color blocks lined up in order for painting.
Step Three

Then resaw across the length of the boards on the table saw to get perfectly squared blocks. Start by cutting 1/4″ off one side to cut the rounded edge off. Then cut 2 – 3/4″ pieces and 1 – 1″ piece from each 12 3/4″ piece. This gives a nice variation in size and ended up being a safer way to cut the blocks, using my push stick.

Be sure to use every safety precaution when cutting; push sticks, masks, and eye protection are your best friends when using a table saw. Set your 3/4″ cut up, then make all of those cuts before switching to the 1″ cut. It’ll make the work faster.

Step Four

Sand all of your 3/4″ and 1″ blocks smooth with 60-grit sandpaper. Don’t round off any of the squared edges. AND, don’t sand down the ends too much. You want to keep the lengths the same. Dust off every piece. Then sand with 150 grit to get a nice smooth finish for this Wood Color Block Table Top DIY from 2×4’s. Now, dust off every piece again.

Hold those craft sticks together to make sure the colors match, before painting.
Step Five

Next, mix about 2 parts floetrol to 1 part acrylic paint. I used floetrol to thin the paint so that the grain would show through while leaving the color rich. I also hoped the floetrol would not raise the grain on that pine, too much. It did raise it a little on some pieces, but not too much. 🙂

I used craft sticks and plastic cups to prep my paints. I like to hold the craft sticks together to make sure the colors look good together. I do the same thing with my acrylic paint pour art on canvas.

Getting great looking and matching colors is a big part of loving your final piece. So put a lot of effort in here. I added some of the darker orange-y color I used to the 2 lighter pinks to help them look better together. It made them look like they were in the same “color family”. If that makes sense. 😉

Step Six

Put your blocks in order, then paint each color on the top and ends of the blocks. I also painted on the corners of the tops to make sure I had them completely covered before glueup.

Some colors may need 3 coats to get full coverage, so make sure they’re all covered in an even layer of color before moving to the next step.

The 2 sections of 1 table top, in clamps. This Wood Color Block Table Top DIY project is kind of a fun way to get creative with color and woodworking.
Step Seven

Once the blocks are all painted and dry, you can glue them together. I used this wood glue and a craft stick to spread the glue on each piece, stacking them together as I went. After each piece, I made sure the top and the front of the table top were as straight as possible. Again, see video for a look at how I did it.

WIPE AWAY ANY GLUE that squeezes out with a damp rag. Try not to use too much glue because you want to keep your painted pieces looking nice. I ended up gluing my tops in 2 sections because I need longer clamps. Once those 2 sections dried, I glued them together and clamped with my Bessey Strap Clamp. I love that thing!

I sanded the front corners smooth after the glue dried. And, sanded the sides for a smoother finish. I carefully touched up the paint before sealing with polyurethane.
I love the nice, subtle sheen you get from poly over painted wood.
Step Eight

After the table top is glued, you can ligthly sand the corners, if you’d like. Then clean off and touch up the paint. Let that dry. Then apply your favorite water-based polycrylic. 🙂 You can attach your table top with the corner braces once it dries. Yay! You can see the tutorial for building those low cost side tables here.

A look at the corner braces I used on my table. For heavier table tops, you’ll need bigger/more braces.
How to build a colorful table top using 2x4 pine studs and acrylic paints. Wood Color Block Table Top DIY tutorial, using cheap pine 2x4's! #woodworkingprojects #woodprojects #woodart #diyfurniture #AbbottsAtHome
I love that pop of color on just the table tops!
Build a unique, pretty & super cheap table top with this Wood Color Block Table Top DIY tutorial, using 2x4's. #Woodworking #AbbottsAtHome #DIYprojects #DIYFurniture
Those pretty colors were inspired by a stunning bedroom makeover designed by the extremely talented Vintage Revivals.
How to build a colorful table top using 2x4 pine studs and acrylic paints. Wood Color Block Table Top DIY tutorial, using cheap pine 2x4's! #woodworkingprojects #woodprojects #woodart #diyfurniture #AbbottsAtHome
If you’re careful lining everything up during glue up, you can have a straight front and flat top. Glue upside down, so that the top is on a flat surface and any slight variation in thickness is on the table bottom. Watch the video to see me gluing up mine.
Build a unique, pretty & super cheap table top with this Wood Color Block Table Top DIY tutorial, using 2x4's. #Woodworking #AbbottsAtHome #DIYprojects #DIYFurniture
I’m a huge fan of bedside tables with a middle shelf for books and magazines.
Build a unique, pretty & super cheap table top with this Wood Color Block Table Top DIY tutorial, using 2x4's. #Woodworking #AbbottsAtHome #DIYprojects #DIYFurniture
In a few months, I’ll be updating a guest bedroom using these sweet tables. So, sign up for the email newsletter to see how that turns out. 🙂

That’s pretty much it for this DIY Wood Color Block Table Top from 2×4’s tutorial. BUT, some of my incredibly talented blogger friends have also shared their latest 2×4 DIY Projects. See more 2×4 Build Challenge Projects here.


Looking for more woodworking projects? How about this Easy DIY Over Washer and Dryer Laundry Table.

Free Plans for this DIY Laundry Table Over Washer and Dryer. This simple build hides those ugly machines, adds extra style and organization. And works as a Laundry Folding table too! #LaundryTable #LaundryFoldingTable #DIYFurniture #LaundryRoomIdeas #AbbottsAtHome

And, check out this DIY Farmhouse Console Table Tutorial.

I love this DIY Farmhouse Console Table Plans with Drawers! This tutorial is easy to follow, with loads of pictures. This table would work great as an entry table or in a Dining Room too. #ConsoleTable #EntryTable #DIYFurniture #AbbottsAtHome

OR, you can find all of my DIY furniture tutorials and build plans here.


Thanks for checking out my DIY Wood Color Block Table Top tutorial. Please let me know if you have questions. Don’t forget to sign up for the Abbotts At Home email newsletter to get DIY, Remodeling, and Crafty ideas in your inbox.

22 thoughts on “DIY Wood Color Block Table Top from 2×4’s”

Comments are closed.