Build a super affordable and pretty side table for your living room or bedroom with these DIY Side Table Plans.
The idea for my little DIY Side Table Plans came from a woodworking challenge on Instagram. The IG Builders Challenge account on Instagram hosts 2 or 3 woodworking challenges a year and I love it! The first day of the challenge always starts with the release of building plans for a random piece of furniture.
You never know what you’ll be building until that day. Then each participant modifies the plans to show off their skills and creativity. Fun, right? During the Spring 2017 challenge, I was awarded 1st Runner Up for my L-Shaped Backyard Bench entry. Yay!
Whether you’re a woodworker or just a fan of DIY, you should follow that IG Account. And, while you’re there, I’d love for you to follow me on Instagram too. You’ll see all the behind the scene’s details and sneak peeks on my builds, home remodeling, and DIY projects.
The original challenge plan for this side table plan for woodworkers was released as a single wood table built from 1 – 8′ long 2×4. You can see the original design below.
For my DIY Wood Side Table Plans, I decided I could use some new bed side tables for my guest room. So, I built two. I raised the height, modified the taper in the legs, added a lower shelf, and switched the top to 3/4″ plywood. I love how simple and elegant my changes turned out. I hope you do too.
UPDATE 2019: I repainted and replaced the simple 3/4″ plywood top on this wood bedside table with my new DIY Wood Color Block Table Top. I love the bit of texture on this design and the thicker profile on the top. This is another 2×4 challenge build that can be made for less than $10.
DIY Side Table Plans – Tools Needed
- Kreg Jig & Kreg 1 1/4″ Coarse Thread Screws
- Various clamps
- Miter Saw or Circular Saw
- Optional: Table Saw for tapering the legs and some sort of homemade jig OR a store-bought tapering jig
- Jig Saw (to notch out the lower plywood shelf)
- 9’ of 2×2 dimensional lumber, like Select Pine
- 8’ of 1×2 dimensional lumber, like Select Pine
- About 2’ x 2’ of 3/4″ Plywood
- Zinsser 123 Primer, or your favorite
- Chalk Paint in any shade you’d like, for the frame
- 2 – 1″ Corner Braces
- Wood Filler, Wood Glue, and Good Paint Brushes
Watch the Quick Side Table Video
Download the Printable Side Table Plans
Hello, DIY friends! You can download the DIY Side Table plans here. These plans are currently free to email subscribers and for personal use only. They cannot be shared or sold without my permission. Please let me know if you have any questions and enjoy your build! 🙂
Side Table Woodworking Plans – Steps to Build
Woodworking Note: I’m providing instructions for building this side table the easiest way, with the best materials. BUT, for the challenge I actually built this by resawing a 2×4 into 2×2 and 1×2 dimensional lumber sizes, with standard squared edges. I’m going to skip explaining that for today. It will just confuse the build.
A Select Pine Board, or similar, 2×2 will provide a much smoother, cleaner, straighter piece of wood for this build. This build will cost about $20, per table, with 2×4’s that have been resawn. Using Select Pine, or similar, dimensional lumber will cost about $30 to $35, per table.
Cut the legs and aprons and stretchers for your table. Measurements can be found in the printable plans at the end of the directions. These DIY Side Table Plans are free to download for all of my email subscribers.
Optional: I’ve slightly tapered the bottom half of my legs. I quickly made my own jig. But you can find store bought jigs that’ll do the job better. I tapered the inside of my legs because I prefer the look of wider legs.
Use your Kreg Jig to put 1 pocket hole on each end of the 1×2″ boards. That will be on 8 boards for 16 pocket holes total.
Sand all of the wood with 120-grit sandpaper. Sand all 4 sides of aprons (horizontal pieces that connect to legs and top), stretchers (horizontal pieces that connect legs), and legs. Smooth down, or knock down, the hard corners to give the piece a softer, more finished look. But keep the short edges on the rails that connect to the 2×2″ legs squared.
For the DIY Side Table Plans we’ll use the Kreg Drill Bit, Screws, and glue to assemble the table. The top apron should be level with the top of the legs. The top of the lower stretcher should be 11 1/2″ from the top. I used a scrap piece of 1/8″ thick paneling to get the 1/8″ set back on the apron and stretcher. Make sure to always wipe away glue with a damp cloth as you go.
Build the shelf. Measure the inside of the lower apron to get the exact measurements for that shelf. Remember to notch out the corners, for the legs, with your jigsaw.
Use your Kreg Jig to add 6 pocket holes to the bottom of your plywood shelf. 2 holes on each long side, 1 on each short. Sand the shelf, then clamp in place. I set this 1/8″ lower than the apron. Screw the shelf in place.
Finishing this DIY Wood Side Table
Use wood filler, as needed and sand smooth with 120-grit sandpaper.If painting, prime the wood with a good primer. Then apply 2 – 3 coats of paint. I prefer chalk paint on furniture. I used this pretty shade of yellow from DecoArt. But, I also mix my own DIY chalk paint from latex paint.
I mixed the white chalk paint I used on the 2019 update on this table. That latex paint is the paint I use on all the trim in our home. It’s Behr’s Polished Pearl in Eggshell. Once you have achieved a solid, finished look with the paint, apply 1 to 2 layers of the Polycrylic, if needed. Lately, I only apply polycrylic to painted furniture if it needs extra protection or if I want to add a little extra sheen.
If staining anywhere, like the top, I am loving how easy Watco Danish Oil is to apply. It’s such a pretty and fast way to get a nice stained finish. I use it almost exclusively, lately. I only top that with polycrylic on table tops that need extra protection. Like the DIY Kids Desk with Storage I built for my boys.
That’s it! You’ve finished this DIY Side Table Plans build. Step back and admire your amazing talent and beautiful table. 😉
Or this beautiful, large L-Shaped Bench for your backyard.
Feeling inspired? Get out there and build your own with these DIY Side Table Plans. Follow the links above to get the things you’ll need. Have fun and let me know if you have questions. Or post pictures of your work and tag Abbotts At Home on FB, I’d love to see it!