Skip to Content

Easy DIY Laundry Table Over Washer and Dryer (Build Steps And Video)

This easy DIY Laundry Table Over Washer and Dryer hides that ugly gap behind your washer and dryer, adds style, and gives you a great folding table!

DIY Laundry Table Over Washer and Dryer

I love this easy to build DIY Table that goes over your Washer and Dryer, guys!

It’s probably tied for the best change I made during my Laundry Room Makeover. It’s sharing the love with converting a few of my existing cabinets into a Mudroom Bench.

Since my washer and dryer aren’t surrounded by walls, I couldn’t just put a countertop over them.

Image of a DIY wood laundry table that slides over a washer and dryer. In a post about how to build a folding table or laundry table.

Building a table was the best solution for us. And, I’m so excited to share this easy DIY Table Over Washer and Dryer build with you all.

This is a great build for anyone new to using a Kreg Jig.

Image of a DIY Laundry Folding Table over a washer and dryer. with text that says "Easy Build Plan".
This easy Laundry Folding Table makes the whole Laundry Room look better. And, it’s a great spot to drop keys or bags AND fold laundry.

BUT, if you don’t have a Kreg, you can adjust this build to work with angle brackets or even just glue and brad nails (with the addition of more supports).

Glue and dowels would work too. But, for this tutorial, we’ll focus on the Kreg Jig steps.

Laundry Folding Table Build Overview Video

If any of the written build steps are confusing, watch this short video.

DIY Over Washer and Dryer Laundry Table Plans - Beginner Woodworker Build Plan

DIY Laundry Table Build Steps

This table is really pretty quick to cut and assemble. It’s essentially 9 pieces; 4 legs, 4 rails, and a top.

Then you have the option of adding 1 or 2 longer sides, if you want to hide more of the machines. You can see how I added the optional extra side pieces to the bench side of my table.

This table hides the huge gap behind our machines made by the dryer vent pipe. That gap drove me crazy for months after we moved in. And you know stuff would fall back there all. the. time. Ugh!

FREE Printable Plans for this table can be found at the end of the tutorial. Let’s get this easy DIY Laundry Table build started!

Full tutorial and build plans for this fantastic over washer and dryer DIY Laundry Table. This simple build hides those ugly machines, adds extra style and organization. #LaundryTable #WoodworkingIdeas #Woodworking #DIYFurniture #LaundryRoom #AbbottsAtHome
This DIY Table Over Washer and Dryer is the first thing I see when I walk into my house. And, I LOVE it so much more than seeing those machines.

Materials Needed

  • Saw, I used a Miter Saw for the straightest possible cuts
  • Power Drill
  • Kreg Jig, I use the Kreg Jig R3, and screws
  • Lumber listed on the printable PDF plans
  • Plywood for the top, I used Maple
  • Edge Banding and Iron to apply it
  • Wood Glue
  • Sandpaper
  • Wood Filler

RECOMMENDED: 13 Best FREE PDF Furniture Build Plans And 12 Popular Woodworking Projects

Before You Start

Make the Height Right

Washers and Dryers vary in size. So does the open space you have on the sides of those machines.

You may need to modify this build to work with your machines. Adjust the leg length to fit your washer and dryer’s height.

Also, adjust the width between the side legs based on how wide your machines are spaced. If you accidentally build your table a bit too short, add adjustable feet to the bottom of the legs to raise it a bit.

Make the Table Removable

I wanted to make sure this table was easy to remove whenever we needed to clean behind the washer and dryer, replace the washer and dryer, paint, or work on the plumbing, etc.

SO, make sure you can get this table out of the Laundry Room.

I measured the opening for the door to the garage and made sure that the top and frame would easily fit through, while assembled. This does mean that the top doesn’t completely cover our washer and dryer.

Make sure you take your Laundry Room door into account when setting your table depth.

My frame had to be modified because the dryer vent blocked the spot for the back right leg. I’ll show you how I modified the design to account for that.

The Free PDF plans will show you how to do this build without that adjustment.

Which Wood to Use

I recommend using Select Pine or Poplar for this build. Either of those would provide a nice, smooth finish for your table frame.

Personally, if I’m staining wood, I like Pine, if I’m painting, I like Poplar. BUT I am using reclaimed common or white boards in the photos.

I wanted to save the boards I used from my original DIY Laundry Table I built 5 years ago.

That table was OK, but I built it before I started using the Kreg Jig R3 so it’s not quite as sturdy as this new table.

Plus, this new DIY Table Over Washer and Dryer is so much prettier. 😉

Look at that huge gap. This DIY Table Over Washer and Dryer hides that gap, those boring machines, stops everything from falling back there, and gives us a great place to fold the laundry.

DIY Laundry Table Build Steps

Step 1

Cut your leg and rail pieces for the frame.

Step 2

Drill 1 pocket-hole in each end of all 4 rails (see build plan). So, you’ll have 8 pocket holes total. I normally use 2 pocket holes, to keep the board from shifting while the glue dries.

But the 1×2 is too small to put 2 pocket holes on. I also drilled pocket holes on the rails to attach the plywood top.

I put a 1/4″ board beneath the 1×2 rail before connecting it to the leg to get a pretty set back.

Step 3

Connect 2 of the legs with one of the short rails, using the pocket hole and wood glue on each side. Be sure to line the top edge of the rail with the top of the leg.

I also like to use a 1/4″ piece of scrap to set the rail a bit back from the leg.

This is a design element and prevents any issues with the screw cracking the 2×2 leg. Now connect the other 2 legs with the other short rail. You should have the 2 short sides of the frame assembled.

Step 4

Connect both of your short sides with a long rail, using the same glue and screw method. Make sure it gets the same set back as the sides too.

You might find it’s easiest to attach the long rails while the short sides are sitting upside-down, on the top of their frames.

A top view of 2 of the rails connected to a leg.

Step 5

Once you have all 3 sides connected, attach the final long rail with your screws and glue.

Optional Step 6

Now, you’re frame is technically done. You can move on to the plywood top OR add the extra framing to 1 or both sides. I added it to one of my sides to hide the side of the machines (and that gap!) next to my bench.

If you can’t see the sides of your machines, you can skip this step.

Add the plywood, with glue and 2 pocket holes into each leg, set back 3/4″ from the legs (1/2″ back from the front of the rails).

Add an extra rail just beneath the plywood, set back 1/4″ to match the rail above the plywood.

You can just caulk around the plywood or frame out the plywood with decorative moulding, like the cap moulding I used.

Add The Plywood Top

Step 1

Cut your plywood top to size for your DIY Laundry Table that goes over your Washer and Dryer.

I always use a cutting guide with the circular saw when cutting plywood. It’s the only way I can make a straight cut, guys! 🙂

Step 2

Now give everything a good sanding. When painting, I sand with 120 or 150-grit sandpaper to smooth the boards and round off sharp edges, a bit.

With the Plywood top I stained, I sanded up to 220-grit. Wipe off all the dust with a tack cloth or very slightly day rag.

Step 3

Attach the edge-banding to the sides of your plywood. It’s a quick and easy job with an iron. If you want to protect your iron, just wrap the bottom with aluminum foil.

Trim away excess banding with an edge trimmer, or carefully, with a box knife. Sand the corners smooth for a seamless look.

Add style and a great folding table to your Laundry Room with this over washer and dryer DIY Laundry Table. See the full tutorial and printable build plans. This simple build hides those ugly machines, adds extra style and organization. #LaundryTable #WoodworkingIdeas #DIYWoodworking #DIYFurniture #LaundryRoomIdeas #AbbottsAtHome
Applying edge-banding to my Maple Plywood top.

Step 4

Stain or paint table top before attaching. And paint or stain the entire frame. It’ll just be easier to do this separately. 🙂

Once that’s finished. Attach the top with glue and screws. Be sure to center it before attaching.

I always finish both sides of everything to protect the wood from possible drying, moisture or humidity.

Plus, it just looks nicer, if someone happens to see the bottom. You don’t want them to think you’re an amateur, right. 😉

Now that your DIY Over Washer and Dryer Laundry Table is built, you’re ready to finish it off.

Full tutorial and build plans for this fantastic over washer and dryer DIY Laundry Table. This simple build hides those ugly machines, adds extra style and organization. #LaundryTable #WoodworkingIdeas #Woodworking #DIYFurniture #LaundryRoom #AbbottsAtHome

Finishing Steps

On the frame, I used Drydex Wood filler to fill in any small gaps, cracks, or imperfections. I went with Magnolia Homes by Kilz color Spontaneous in Eggshell on the frame.

Adding 1 coat of this Matte Polycrylic really helped the color pop.

For the table top, I used 2 coats of Watco’s Danish Oil Finish in Medium Walnut. I love this product, just pour it on and spread around for a nice finish.

I did follow it up with 2 coats of the Matte Polycrylic too.

The Danish Oil Finish is nice, but adding the polycrylic gave the finish a depth that feels more professional and high-end.

Add style and a great folding table to your Laundry Room with this over washer and dryer DIY Laundry Table. See the full tutorial and printable build plans. This simple build hides those ugly machines, adds extra style and organization. #LaundryTable #WoodworkingIdeas #DIYWoodworking #DIYFurniture #LaundryRoomIdeas #AbbottsAtHome
I love how easy it is to apply Watco’s Danish Oil!

Printable DIY Laundry Table Build Plans!

Hello, DIY friends! You can download the FREE DIY Laundry Table plans from my Gumroad store by clicking the button below.

These plans are currently free to email subscribers and for personal use only. They cannot be shared or sold without my permission. Please let me know if you have any questions and enjoy your build! 🙂

Hide those ugly machines with this DIY Table Over Washer and Dryer or DIY Folding Table. Full tutorial and free printable build plans.
Save this DIY on Pinterest.

Add style and a great folding table to your Laundry Room with this over washer and dryer DIY Laundry Table. See the full tutorial and printable build plans. This simple build hides those ugly machines, adds extra style and organization. #LaundryTable #WoodworkingIdeas #DIYWoodworking #DIYFurniture #LaundryRoomIdeas #AbbottsAtHome
I’m in love with this whole room! You can see the full Makeover Reveal and the Mudroom Bench DIY in previous posts too. Subscribe to Abbotts At Home on YouTube, for the lastest DIY and Home Improvement Projects and Videos
Full tutorial and build plans for this fantastic over washer and dryer DIY Laundry Table. This simple build hides those ugly machines, adds extra style and organization. #LaundryTable #WoodworkingIdeas #Woodworking #DIYFurniture #LaundryRoom #AbbottsAtHome
You can find all of the details behind this Teal Laundry Room Makeover here.

More DIY Projects You Might Like

Looking for a big bench for your backyard? Check out my L-Shaped Backyard Bench tutorial.

How I built my L-shaped DIY Outdoor Bench for $130, awarded 2nd place in the IG Builders Challenge, season 3

Or this beautiful DIY Chunky Leg Farmhouse Bench for inside your house.

Farmhouse Style DIY Upholstered Bench Plan with Tongue & Groove shelf. Makes a great end of bed bench, dining table bench, living room coffee table or entry bench.


If you need a great little desk for your elementary age kids. Check out this DIY Childrens Desk with Storage Drawers.

Full tutorial, build overview video, and printable plans for this beautiful DIY Childrens Desk Plans with Storage Drawers.

Check out this beautiful DIY Console Table with Drawers too!

And, I love this sweet DIY Kids Play Kitchen.

Yay! This Kids Play Kitchen DIY Woodworking Plan is an easy woodworking build with lots of fun additions that little kids will love! I have the tutorial, printable plans, and a video to help you get this built. #AbbottsAtHome #KidsKitchen #PlayKitchen #KidsKitchen #KidsFurniture #woodworking

Feeling inspired? Get out there and make your own DIY Table Over Washer and Dryer.

Have fun and let me know if you have questions. Don’t forget to sign up for the Abbotts At Home email newsletter to get DIY, Remodeling, and Crafty ideas in your inbox.

DIY Table Over Washer and Dryer Build Plan

Hide those ugly machines with this DIY Table Over Washer and Dryer or DIY Folding Table. Full tutorial and free printable build plans.

Hide those ugly machines with this DIY Table Over Washer and Dryer or DIY Folding Table. Full tutorial and printable build plans for a beautiful table to slide over your washer and dryer.

Tools

Instructions

Step 1

  1. Cut your leg and rail pieces for the frame.

Step 2

  1. Drill 1 pocket-hole in each end of all 4 rails (see build plan). So, you’ll have 8 pocket holes total. I normally use 2 pocket holes, to keep the board from shifting while the glue dries. But the 1×2 is too small to put 2 pocket holes on. I also drilled pocket holes on the rails to attach the plywood top.

Step 3

  1. Connect 2 of the legs with one of the short rails, using the pocket hole and wood glue on each side. Be sure to line the top edge of the rail with the top of the leg. I also like to use a 1/4″ piece of scrap to set the rail a bit back from the leg. This is a design element and prevents any issues with the screw cracking the 2×2 leg. Now connect the other 2 legs with the other short rail. You should have the 2 short sides of the frame assembled.

Step 4

  1. Connect both of your short sides with a long rail, using the same glue and screw method. Make sure it gets the same set back as the sides too. You might find it’s easiest to attach the long rails while the short sides are sitting upside-down, on the top of their frames.

Step 5

  1. Once you have all 3 sides connected, attach the final long rail with your screws and glue.

Optional Step 6

  1. Now, you’re frame is technically done. You can move on to the plywood top OR add the extra framing to 1 or both sides. I added it to one of my sides to hide the side of the machines (and that gap!) next to my bench. If you can’t see the sides of your machines, you can skip this step.
  2. Add the plywood,  with glue and 2 pocket holes into each leg, set back 3/4″ from the legs (1/2″ back from the front of the rails). Add an extra rail just beneath the plywood, set back 1/4″ to match the rail above the plywood. You can just caulk around the plywood or frame out the plywood with decorative moulding, like the cap moulding I used.

Step 7

  1. Cut your plywood top to size for your DIY Table Over Washer and Dryer. I always use a cutting guide with the circular saw when cutting plywood. It’s the only way I can make a straight cut, guys! 🙂

Step 8

  1. Now give everything a good sanding. When painting, I sand with 120 or 150-grit sandpaper to smooth the boards and round off sharp edges, a bit. With the Plywood top I stained, I sanded up to 220-grit. Wipe off all the dust with a tack cloth or very slightly day rag.

Step 9

  1. Attach the edge-banding to the sides of your plywood. It’s a quick and easy job with an iron. If you want to protect your iron, just wrap the bottom with aluminum foil. Trim away excess banding with an edge trimmer, or carefully, with a box knife. Sand the corners smooth for a seamless look.

Step 10

  1. Stain or paint table top before attaching. And paint or stain the entire frame. It’ll just be easier to do this separately. 🙂 Once that’s finished. Attach the top with glue and screws. Be sure to center it before attaching. I always finish both sides of everything to protect the wood from possible drying, moisture or humidity. Plus, it just looks nicer, if someone happens to see the bottom. You don’t want them to think you’re an amateur, right.

Notes

This easy DIY Table Over Washer and Dryer hides that ugly gap behind your washer and dryer, adds style, and gives you a great folding table!

Read these Build Notes, before you start!

Washers and Dryers vary in size. So does the open space you have on the sides of those machines. You may need to modify this build to work with your machines. Adjust the leg length to fit your washer and dryer’s height. Also, adjust the width between the side legs based on how wide your machines are spaced. If you accidentally build your table a bit too short, add adjustable feet to the bottom of the legs to raise it a bit.

I wanted to make sure this table was easy to remove whenever we needed to clean behind the washer and dryer, replace the washer and dryer, paint, or work on the plumbing, etc. SO, make sure you can get this table out of the Laundry Room.

I measured the opening for the door to the garage and made sure that the top and frame would easily fit through, while assembled. This does mean that the top doesn’t completely cover our washer and dryer. Make sure you take your Laundry Room door into account when setting your table depth.

My frame had to be modified because the dryer vent blocked the spot for the back right leg. I’ll show you how I modified the design to account for that. The Free PDF plans will show you how to do this build without that adjustment.

I recommend using Select Pine or Poplar for this build. Either of those would provide a nice, smooth finish for your table frame. Personally, if I’m staining wood, I like Pine, if I’m painting, I like Poplar. BUT I am using reclaimed common or white boards in the photos.

Paul

Tuesday 23rd of July 2019

Hi this is a great project. I am trying to find the pdf building plans for the Dryer DIY Laundry Table on your website but I have had no luck. Could you possibly send these to me by email. Thanks so Much.

Will McConnell

Wednesday 2nd of March 2022

@Paul, I'm also looking for the PDF plans.. Did you ever find these?

Candace Blanton

Saturday 22nd of June 2019

I have been wanting to do something similar in my washroom but I don't think I need the legs. The width of the space for the washer and dryer is right at 72". I had thought of using a 1 by something attached to the side walls and back for it to sit on. I too have to deal with the pesky water and outlets and think I will put a raised back to keep from losing things. My concern is that I think over time the boards will sag. Is this likely and what would you do to prevent this? Your wainscoting in the bathroom looks awesome. Did you sand the texture off before attaching the boards or just caulk it fill in the spaces?

Stephanie

Saturday 22nd of June 2019

Hi Candace, Thanks so much. First, I'm not exactly sure what texture you mean. But I'm guessing you mean the walls. We don't really have textured walls here. So, I didn't have to worry about that when adding the wainscoting. I have to say, I've never really lived in a home with textured walls. So, I'm not exactly sure how I'd handle it. Maybe attach the moulding, then fill in the gaps with wood filler for the smoothest look????? As far as the laundry table goes, the strongest and least likely to sag side of a "1 by" board is that 1" side. So, if you use a 1x2 or 1x3, just make sure that the 1" side faces the ceiling and the 2 or 3" side faces out. I'd build a simple frame. Basically a large rectangle. Maybe 72" x 32 (or whichever size you need) with 2 more 1x2's or 1x3's stretching across the 32" length of the rectangle. That wouldn't sag and it would be a great support for the top you pick. You could build a large triangle bracket to support each side of the top. Just make sure to avoid plumbing and wiring. Good luck. :)

diy180

Saturday 14th of July 2018

This is something I have always wanted to do. Thank you for sharing at Dishing it and Digging it link party. You are one of this weekend features.

Stephanie

Saturday 14th of July 2018

Thanks so much for the feature, Vanessa! Have a great week. :)

Ann

Thursday 12th of July 2018

This is such a great idea! I'd like to invite you to share with us at Wall to Wall DIY Wednesday, which runs thru Saturdays.

Stephanie

Saturday 14th of July 2018

Thanks so much. I'll be there next week. Thanks for the invite!

Chas

Wednesday 11th of July 2018

I have been wanting to do this in my laundry room, great tutorial! Thanks for sharing on To Grandma's House We Go! I'll be featuring you next week :)

Stephanie

Saturday 14th of July 2018

Thanks so much, Chas!

Comments are closed.
Skip to Instructions